View DTDG23YP1_734591.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DTDG23YP
Transistors
1A / 60V Digital transistor (with built-in resistors and zener diode)
DTDG23YP
Applications Inverter, Interface, Driver Features 1) High DC current gain. (Min. 300 at VO / IO=2V / 0.5A) 2) Low Vo(on). (Typ. 0.4V at IO / II=500mA / 5mA) 3) Built-in zener diode gives strong protection against reverse surge by L-load (an inductive load). Structure NPN epitaxial planar silicon transistor (with built-in resistors and zener diode) Packaging specifications
Package Packaging type Code Basic ordering unit (pieces) MPT3 Taping T100 1000
External dimensions (Unit : mm)
MPT3
4.5 1.6
0.5
1.5
(1)
(2)
(3)
1.0
2.5 4.0
0.4
0.4 1.5
0.5 1.5 3.0
0.4
(1)Base (2)Collector (3)Emitter
Abbreviated symbol : E02
Part No.
DTDG23YP
Absolute maximum ratings (Ta=25C)
Parameter Supply voltage Input voltage Collector current Symbol VCC VIN IC ICP Pd Tj Tstg Limits 6010 -6 to +40 1 2 1 1.5 2 150 -55 to +150 Unit
Equivalent circuit
OUT
V A A W C C
IN
R1 R2
GND
IN OUT
Power dissipation Junction temperature Storage temperature 1 Pw < 10ms, Duty cycle < 2% - - 2 When mounted on 40 40 0.7mm ceramic board.
+ +
GND R1=2.2k R2=10k
Electrical characteristics (Ta=25C)
Parameter Input voltage Output voltage Input current Output current DC current gain Transition frequency Input resistance Emitter-base resistance Characteristics of built-in transistor Symbol VI(off) VI(on) VO(on) II IO(off) GI fT R1 R2 Min. - 2 - - - 300 - 1.54 7 Typ. - - - - - - 80 2.2 10 Max. 0.3 - 0.4 3.6 0.5 - - 2.86 13 Unit V V mA A - MHz k k Conditions VCC=5V , IO=100A VO=0.4V , IO=100mA IO/II=500mA/5mA VI=5V VCC=40V , VI=0V VO=2V , IO=500mA VCE=5V , IE= -0.1A , f=30MHz - -
Rev.B
1/2
DTDG23YP
Transistors
Electrical characteristics curves
100
VO=0.4V
10m 5m 2m
VCC=5V
10k 5k
VO=2V
INPUT VOLTAGE : VI(on) (V)
50 20 10 5 2 1 0.5m 0.2m 0.1m 1m 2m 5m 10m 20m 50m 100m 200m 500m 1
OUTPUT CURRENT : IO (A)
1m 500 200 100 50 20 10 5 2 1 0 0.5 1.0
DC CURRENT GAIN : GI
Ta=125C 25C -40C
2k 1k 500 200 100 50 20
Ta=125C 25C -40C
Ta= -40C 25C 125C
1.5
2.0
2.5
3.0
10 1m 2m
5m 10m 20m 50m 100m200m 500m 1
OUTPUT CURRENT : IO (A)
INPUT VOLTAGE : VI(off) (V)
OUTPUT CURRENT : IO (A)
Fig.1 Input voltage vs. output current (ON characteristics)
Fig.2 Output current vs. Input voltage (OFF characteristics)
Fig.3 DC current gain vs. Output current
1 500m
IO / II=100/1
OUTPUT VOLTAGE : VO(on) (V)
200m 100m 50m 20m 10m 5m 2m 1m 1m 2m
Ta=125C 25C -40C
5m 10m 20m 50m100m 200m 500m 1
OUTPUT CURRENT : IO (A)
Fig.4 Output voltage vs. Output current
Rev.B
2/2
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.
Appendix1-Rev1.1

▲Up To Search▲

Price & Availability of DTDG23YP1

	To Download DTDG23YP1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .